HEATING
.
.
.
.
.
.
Production of inner bodies for boilers.
| Workpiece: | Body with longitudinal butt-welded joint |
| Material: | Normal steel |
| Performed operation: | Trimming - Beading |
| Working cycle: | Semi-Automatic with two place settings to work in sequence both ends |
Production of inner bodies for boilers.
1st Place setting
| Workpiece: | Body with longitudinal butt-welded joint |
| Material: | Normal steel |
| Performed operation: | Trimmimg - Beading |
| Working cycle: | Semi-Automatic with two place settings to work in sequence both ends |
2nd Place setting
| Workpiece: | Body with longitudinal butt-welded joint |
| Material: | Normal steel |
| Performed operation: | Trimming - Upper Beading |
| Working cycle: | Semi-Automatic with two place settings to work in sequence both ends |
Production of outer bodies for round water heaters.
| Workpiece: | Body with overlapping edges welded with pressure rollers |
| Material: | Normal steel |
| Performed operation: | Shaped Beading |
| Working cycle: | Semi-Automatic, with two place settings to work in sequence both ends |
ONE PLACE SETTING SOLUTION
| Workpiece: | Shaped body with overlapping edges welded with pressure rollers |
| Material: | Normal steel |
| Performed operation: | Simultaneous shaped Beading on both edges |
| Working cycle: | Semi-Automatic with single placement, subject to the use of a two-head beading machine |
Production of outer bodies for square water heaters.
| Workpiece: | Shaped body with overlapping edges welded with pressure rollers |
| Material: | Normal steel |
| Performed operation: | Shaped Beading |
| Working cycle: | Semi-Automatic, with two place settings to work in sequence both ends |
ONE PLACE SETTING SOLUTION
| Workpiece: | Shaped body with overlapping edges welded with pressure rollers |
| Material: | Normal steel |
| Performed operation: | Simultaneous shaped Beading on both edges |
| Working cycle: | Semi-Automatic with single placement, subject to the use of a two-head beading machine |
Production of outer round water heater caps.
| Workpiece: | Deep drawn piece with flange |
| Material: | Normal steel |
| Performed operation: | Trimmimg / Flanging - Upward Flange Bending |
| Working cycle: | Semi-Automatic |
Via Ponte dei Granatieri, 8
36010 Chiuppano (Vicenza), Italy
R.E.A di VI: 210567
R.I di VI: 08808900156
Cap. Soc: € 5.200.000,00 i.v
