MISCELLANEOUS
.
.
.
.
.
.
Details for methane gas meters with intermediate 3-layer lockseaming, consisting of internal equipment, male and female half-shell.
| Workpiece: | Deep drawn male piece with blank flange - deep drawn female piece with shaped blank flange - inside equipment |
| Material: | Normal steel |
| Performed operation: | 3-layer Lockseaming of the half-shells |
| Working cycle: | Semi-Automatic |
Details for methane gas meters with intermediate 4-layer lockseaming, consisting of internal equipment, two half-shells and joint clamp.
| Workpiece: | Upper and lower deep drawn piece with blank flange - shaped joint clamp - inside equipment |
| Material: | Normal steel |
| Performed operation: | 4-layer Lockseaming of the half-shells |
| Working cycle: | Semi-Automatic |
Production of shields of various shapes and sizes.
| Workpiece: | Deep drawn piece with reduced flange |
| Material: | Normal steel |
| Performed operation: | Trimmimg - Scrap Breaking into two parts |
| Working cycle: | Semi-Automatic |
Various components for gas masks with different working processes.
MOUTH - Working process
| Workpiece: | Trimmed deep drawn piece |
| Material: | Anodised Aluminium |
| Performed operation: | Threading |
| Working cycle: | Semi-Automatic |
UPPER AND LOWER FILTER - Working process
| Workpiece: | Trimmed deep drawn piece - filter - perforated diaphragm |
| Material: | Anodised Aluminium |
| Performed operation: | Calking of the diaphragm on the mouth |
| Working cycle: | Semi-Automatic |
1° ASSEMBLING PROCESS
| Workpiece: | Mouth - Filter |
| Material: | Anodised Aluminium |
| Performed operation: | Calking of the filter on the mouth |
| Working cycle: | Semi-Automatic |
2° ASSEMBLING PROCESS
| Workpiece: | Mouth and upper filter assembled together - lower filter - bottom end |
| Material: | Anodised Aluminium |
| Performed operation: | Intermediate 3-layer Lockseaming of the two half-parts |
| Working cycle: | Semi-Automatic |
Production of flanges for cable reels, with various shapes and sizes.
| Workpiece: | Stamped and ribbed disk |
| Material: | Normal steel |
| Performed operation: | Edge Chamfering - Curling |
| Working cycle: | Semi-Automatic |
Via Ponte dei Granatieri, 8
36010 Chiuppano (Vicenza), Italy
R.E.A di VI: 210567
R.I di VI: 08808900156
Cap. Soc: € 5.200.000,00 i.v
